INOVASI PERANCANGAN DAN PENGEMBANGAN MESIN AUTO RSB CASE INSERT PADA LINE G2RN#5
DOI:
https://doi.org/10.61105/jieti.v3i1.341Keywords:
automation, pick and place, pneumatic system, machine vision, relay assemblyAbstract
In response to the increasing demand for high-speed and consistent manufacturing processes in the Industry 4.0 era, PT Omron Manufacturing of Indonesia developed an automated solution known as the Auto RSB Case Insert. This system was implemented on the G2R relay production line to replace conventional manual and semi-automated methods. It integrates pneumatic actuation, pick-and-place mechanisms, and camera-based inspection to achieve precise and efficient case insertion. The design aims to reduce cycle time, minimize human error, and ensure product quality consistency. Performance evaluation confirmed that the system meets its target of a ≤3-second cycle time per unit with over 90% accuracy. This development demonstrates the effectiveness of integrated automation in improving production throughput and reliability in modern manufacturing environments.
Downloads
References
Bolton, W. (2015). Mechatronics: Electronic control systems in mechanical and electrical engineering (6th ed.). Pearson Education.
Bishop, R. H. (2007). Mechatronics: An introduction. CRC Press.
Esposito, A. (2009). Fluid power with applications (7th ed.). Pearson Education.
Groover, M. P. (2011). Automation, production systems, and computer-integrated manufacturing (3rd ed.). Pearson. Norton, R. L. (2000). Machine design: An integrated approach. Prentice Hall.
Sularso, & Suga, K. (1997). Dasar perencanaan dan pemilihan elemen mesin. Pradnya Paramita.
Surdia, T., & Saito, S. (1999). Pengetahuan bahan teknik (4th ed.). Pradnya Paramita.
Tjahjanti, P. H. (2019). Buku ajar pengetahuan bahan teknik. ResearchGate.
Kee, E., Chong, J. J., Choong, Z. J., & Lau, M. (2023). Development of smart and lean pick-and-place system using EfficientDet-Lite for custom dataset. Applied Sciences, 13(20), 11131.
Napoleon, E., Halim, A., Utama, D. W., Irawan, A. P., & Waworuntu, J. (2022). Design and optimizing top cover feeding unit modular production system and pick & place station. Jurnal Asiimetrik, 6(2).
Niu, H., Ji, Z., Zhu, Z., Yin, H., & Carrasco, J. (2021). 3D vision-guided pick-and-place using KUKA LBR iiwa robot.
Prabuwono, A. S., & Akbar, H. (2008). The design and development of automated visual inspection system for press part sorting. Proceedings of the 4th IEEE International Colloquium on Signal Processing & Its Applications.
Wahab, N. A., & Thangaraj, J. (2019). Automation of pick and place operation in contact lens manufacturing. ELEKTRIKA: Journal of Electrical Engineering, 17(2).
Zhang, Y., Wu, L., Han, B., & Lin, C. (2019). Machine vision intelligence for product defect inspection based on deep learning and Hough transform. Journal of Manufacturing Systems, 51, 52–60. https://doi.org/10.1016/j.jmsy.2019.03.002
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Dwitri Wijaya
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
